Management of Filtration Laboratory of Isfahan Science and Research Town (12 years)
R & D Management (20 years)
Quality Assurance Management (10 years)
Design and implementation of filtration and separation projects
Designing a complete spray dryer system (air-oil separation system)
Naphtha purification system at the catalyst inlet
Hydrocarbon-water separation system
The founder of the first filtration laboratory in Iran
Compiler of IGS-M-PM-111 standard
Member of American Filtration Society (AFS)
Member of the scientific committee of Iranfiltech
Member of the Scientific Committee and Expert Panel of Niro Research Institute
Inventor of new gas industry cartridge filters called PolyMent Filter
Inventor of fibrous filters in the automotive industry
Participation in the localization of following filters:
RO-Pre filter: Sefid Dasht Steel Complex
Pre-Polymer Candle Filter: Shahid Tendgouyan Petrochemical Company
Rich glycol cartridge filter: Fourth Refinery
Compressor Oil Separator: Iranian Offsore Oil Company
Compressor Air Intake Filter: Shahid Tendgouyan Petrochemical Company
Turbine Lube Oil Filter:
Compressor Air Intake Filter(ASU): Damavand Energy Company
Gas Turbine Air Intake Filter (V94.2): Damavand Energy Company
Air Compressed In-line filter: Damavand Energy Company
Compressor Air Intake Filter: Damavand Energy Company
Designer and manufacturer of testing equipment for national and international standards
EN-779, ISO16890,ISO 16889, ISO 2941, ISO 2942, ISO 2943,ISO 9237, ISO 5011, ISO 11057, ASTM F316
Founder of National Filtration Conference
Teaching:
Basics of Filtration (preliminary - advanced)
Principles of Filtration Based on Standards
Teaching Related Standards (EN-779, ISO16890,ISO 16889, ISO 2941, ISO 2942, ISO 2943,ISO 9237, ISO 5011, ISO 11057, ASTM F316
Thorsten Stoffel
Education
Master in pollical sciences, business administration and American English
Expriences:
Responsible for quality control at Siemens AG (2002-2000)
Manager of various products at BenQ Mobile GmbH & Co OHG (2005-2006)
product manager for various areas of consumer electronics at Siemens and TDK (2003-2008)
Senior Global Product Manager for air filtration products at DELBAG GmbH (2008-2018)
Responsible for the global air filtration product line of DELBAG GmbH (2018 until now)
Responsible for the product direction, product development and marketing of the air filter elements marketed by DELBAG
Central interface between sales, production and sales, production and R&D
Member of the DELBAG negotiating team during the transition to Hengst SE in 2018 and represents the corporate interests of DELBAG before international expert committees and industry associations, such as the VDMA (German Association of Mechanical Engineers) or Eurovent
Projects:
English teacher (1997-2000)
Conducting numerous open webinars and holding countless lectures before distinguished audiences on air filtration trends and physics over the last 13 years in the sector
Publication of the podcast etitled bio functionalizing activated carbon in collaboration with OFI
The launch of food-safe filters for HVAC applications
A low-pressure-loss HEPA filter line
Teaching:
Basics of Filtration (preliminary - advanced)
Principles of Filtration Based on Standards
Teaching Related Standards (EN-779, ISO16890,ISO 16889, ISO 2941, ISO 2942, ISO 2943,ISO 9237, ISO 5011, ISO 11057, ASTM F316
Ebrahim Mohseni
Education
PhD in Management (DBA)
Master of Executive Management(EMBA).
Bachelor in Safety Engineering and Technical Inspection (Petroleum University of Technology)
Expriences
Safety and Technical Investigations specialist, Iranian Offshore Oil Company, for 3 years
Technical Inspection Specialist, Iranian Offshore Oil Company, for 3 years
Technical Inspection specialist, Isfahan Gas Company, for 1 year
Senior Technical Inspection Specialist, Isfahan Gas Company, for 12 years
Head of Technical Inspection of Isfahan Gas Company for 4 years
Head of Safety and HSE of Isfahan Gas Company for 4 years
The head of the specialized welding management committee of National Iranian Gas Company
A member of the strategic committee of technical inspection of the management of gas supply
Member of the Special Committee for Welding and Non-Destructive Testing of National Iranian Gas Company
Member of the Policymaking and Industrial Committee of the Trenchless International Conference
The official specialist of the Organization of Standards and Industrial Research of Iran in the field of data collection and standard development
International Articles
The application of radiographic non-destructive testing on the butt fusion welding of polyethylene pipes was presented to the 13th International Congress of Mechanical Engineering
It is necessary to perform non-destructive tests in Split Tee welding during Hot tap and present it at the international conference on welding and non-destructive tests
The effect of thermal operations in order to prevent hot cracks during hot splitting (South Korea) (IGRC-2011)
Submitting an article to the European Pipeline Technology Conference (PTC8-2012) and presenting it in Hannover, Germany
Presenting an article to the European Gas Technology Conference (EGATEC-2015) in Vienna, Austria
Submitting an article to the National Association of Corrosion Engineers(NACE) and presenting it in the UAE
Presentation of the paper and participation in the conference in Brazil (IGRC-2017)
Presentation of the paper and participation in the Swedish conference (WCNDT-2018)
Presenting an article and participating in the South Korean conference (WGG-2022)
Internal Articles and Honors
Preparation of software for testing underground lines using a pressure gauge, presented to the first conference of the Iran International Conference Center
The reasons for the possibility of radiographic welding in the production of pipes by the ERW method were presented to the first pipe conference in the Iran International Conference Center
The reasons for the necessity of non-destructive tests in the period of hot fusion, the first conference of non-destructive tests of Iran 2019
Multipurpose optimization of operational conditions of natural gas transmission and distribution lines
Experimental analysis and simulation of the temperature contour created in the electrofusion welding process of polyethylene saddles of gas pipelines and estimation of the appropriate connection temperature
Assessment of internal destruction and the cause of gas leakage in the gas transmission pipeline of Komshecheh, Isfahan
Investigating the causes of destruction of 16-inch grade X52 pipes under the API5L standard made by Ahvaz Pipe Industrial Company
Compilations
Translation of the book with the title of knowledge of pipes and connections
Author of the book on the interpretation of industrial radiographic films
Author of the book 205 questions and answers related to flanges
Editing of the book of plumbing industry
Editing of the technical inspection book of paint and protective coatings
Research Activities
Supervision of more than 10 research paper and thesis through the research unit of Isfahan Gas Company
Preparation of software and analysis software for destructive tests of polyethylene pipes
Technical and economic feasibility studies of using expansion turbines for electricity generation in gas pressure reduction stations in Isfahan province
Providing the necessary solutions for the safety of gas distribution steel networks under the influence of drift and ground settlement in Damaneh city
Field survey and presentation of strategies to reduce the natural gas flow from subscribers equipment
Experimental analysis and simulation of the temperature contour created in the electrofusion welding process of polyethylene saddles of gas pipelines and estimation of the appropriate connection temperature with the help of non-destructive tests
Analysis of the stress on the spring of spring safety valves by ABAQUs software
Internship plans
Investigating the alternative of dichromatizing system instead of hot and cold galvanizing in metal parts such as screws, nuts and sensitive parts
Identification, classification, characterization and production methods of materials used for waterproofing ball valves and developing standards for them
Multi-objective optimization of operational conditions of gas lines of Isfahan Gas Company
Laser engraving of API pipes for product tracking in gas projects in Isfahan province
Investigating the causes of destruction of 16-inch grade X52 pipes under the API5L standard made by Ahvaz Pipe Industry Company
Scientific Records
Preparation and registration of software for hydrostatic tests of underground gas transmission pipelines
Nominated as one of the top 17 European innovations of the year at the European Gas Technology Conference in 2015
Nominee for selection of outstanding trainer of Non Destructive Testing Association - ASNT Mentoring in 2016
The official expert of Iran Standard Institute in the field of mechanics, metallurgy, promotion and education of standards.
Technical cooperation in the specialized engineering publication of INSPECTOC Petroleum University of Technology
Membership in the American Association of Non-Destructive Testing (ASNT)
